Installation Procedure
- Install the power brake booster pump bracket, if removed. Refer to Power Brake Booster Pump Bracket Replacement .
- Install the power brake booster pump assembly.
- CAUTION:
Refer to Fastener Caution .
Install the power brake booster pump bracket nuts (1).
- 5 speed manual transmission: Tighten the nuts to 58 N.m (43 lb ft)
- 6 speed automatic transmission, 6 speed manual transmission: Tighten the nuts to 22 N.m (16 lb ft)
Install the power brake booster pump vent hose and grommet (1) to the left side rail.
- Connect the power brake booster pump electrical connector.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Through the left front wheelhouse, connect the power brake booster vacuum hose quick connect (1) to the power brake booster pump port.
- Install the battery tray. Refer to Battery Tray Replacement .