LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Trax LS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Pump Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM2772221Courtesy of GENERAL MOTORS COMPANY

    Install the power brake booster pump bracket to the power brake booster pump.

  2. Install the power brake booster pump bolts (1).
  3. GM2772219Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the power brake booster pump nuts (1) and tighten to 7 N.m (62 lb in).

  4. GM2772218Courtesy of GENERAL MOTORS COMPANY

    Connect the power brake booster pump vent hose (1).

  5. Install the power brake booster pump electrical harness and retainer to the power brake booster pump bracket.
  6. Install the power brake booster pump. Refer to Power Brake Booster Pump Replacement .
scientia non olet · About LEMON Manuals