Installation Procedure
Assemble the brake hose fitting bolt (1) and the new brake hose fitting gaskets (2) to the brake hose fitting (3).
- Install the brake hose assembly to the brake caliper and tighten the fitting bolt to 40 N.m (30 lb ft).
Install the brake hose grommet (1) to the strut bracket.
Install the brake hose to the wheelhouse bracket and install the retainer (1).
Install the brake pipe fitting (1) to the front brake hose and tighten the fitting to 18 N.m (13 lb ft).
- Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) , and Hydraulic Brake System Bleeding (Pressure) .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .