Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Remove the battery. Refer to Battery Replacement .
Disconnect the brake pressure modulator valve (BPMV) rear pipe fitting (1) from the master cylinder.
- Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Disconnect the BPMV rear pipe fitting (1) from the BPMV.
- Plug the BPMV inlet port to prevent brake fluid loss and contamination.
- Remove the brake pipe from the vehicle.