Removal Procedure
WARNING:
Refer to Brake Dust Warning .
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Remove the battery. Refer to Battery Replacement .
Disconnect the brake pressure modulator valve (BPMV) front brake pipe fitting (1) from the BPMV.
- Plug the BPMV outlet port to prevent brake fluid loss and contamination.
Release the BPMV front brake pipe from the retaining clips (1).
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Release the BPMV front brake pipe from the retaining clip (1).
- Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Disconnect the BPMV front brake pipe fitting (1) from the right front brake hose.
- Remove the BPMV front brake pipe from the vehicle.