LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Trax LS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the brake fluid level indicator switch electrical connector.
  2. GM2910018Courtesy of GENERAL MOTORS COMPANY

    Using a small, flat-bladed tool, lift the locking tab on the underside of the brake fluid level indicator switch (1) and remove the switch.

  3. Inspect the master cylinder reservoir for damage and replace, if necessary. Refer to Brake Master Cylinder Reservoir Replacement .
scientia non olet · About LEMON Manuals