LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Trax LS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the master cylinder reservoir, if removed. Refer to Brake Master Cylinder Reservoir Replacement .
  2. GM2910018Courtesy of GENERAL MOTORS COMPANY

    Install the brake fluid level indicator switch (1) by pressing the switch firmly into the brake master cylinder reservoir.

  3. Connect the brake fluid level indicator switch electrical connector.
scientia non olet · About LEMON Manuals