Installation Procedure
- Using the CH-42450-A wheel hub resurfacing kit to clean the wheel hub flange of any corrosion.
- Adjust the drum brakes. Refer to Drum Brake Adjustment .
Install the brake drum (1).
- CAUTION:
Refer to Fastener Caution .
Install the brake drum bolt (1) and tighten to 9 N.m (80 lb in).
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Apply the brakes 2 or 3 times to seat and center the brake shoes on the brake drum.