LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Traverse High Country, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement >> Removal Procedure

Removal Procedure

  1. GM4709947Courtesy of GENERAL MOTORS COMPANY

    Air Inlet Grille Panel (1) - Remove - Air Inlet Grille Panel Replacement

  2. GM4709951Courtesy of GENERAL MOTORS COMPANY

    Rocker Panel Molding (1) - Remove - Rocker Panel Molding Replacement

  3. GM4709953Courtesy of GENERAL MOTORS COMPANY

    Front Wheel Opening Molding (1) - Remove - Front Wheel Opening Molding Replacement

  4. GM4709955Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner- (1) - Remove - Front Wheelhouse Liner Replacement

  5. GM4711061Courtesy of GENERAL MOTORS COMPANY

    Front Fender Insulator (2) - Remove - Front Fender Insulator Replacement 

  6. GM4709956Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (1) - Remove - Front Bumper Fascia Replacement

  7. GM4749081Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Guide (3) - Remove - Front Bumper Fascia Guide Replacement

  8. GM4710760Courtesy of GENERAL MOTORS COMPANY

    Headlamp (1) - Remove - Front Headlamp Replacement

  9. GM4709958Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Place protective covering over windshield at top rear bolt to prevent windshield breakage.

    Front Fender Bolt (1) - Remove

  10. Front Fender Bolt (2) - Remove
  11. GM4709961Courtesy of GENERAL MOTORS COMPANY

    Front Fender Nut (1) - Remove

  12. Front Fender Bolt (2) - Remove [2x]
  13. GM4709963Courtesy of GENERAL MOTORS COMPANY
  14. Front Fender Bolt (1) - Remove [2x]
  15. GM4709966Courtesy of GENERAL MOTORS COMPANY

    Front Fender Bolt (1) - Remove [3x]

  16. Front Fender (2) - Remove
scientia non olet · About LEMON Manuals