Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to:Evaporative Emission Control System Description
| Circuit | Description |
|---|---|
| 5 V Reference | Regulated voltage supplied by the control module. |
| Signal | The control module input circuit has an internal resistance connected to ground. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B150 Fuel Tank Pressure Sensor | The sensor measures the pressure in the component:Fuel Tank |
| K111 Fuel Pump Driver Control Module | The control module K111 supplies the fuel pump with a PWM signal in order to achieve the desired fuel line pressure. |