LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Special Tools

Equivalent regional tools: Special Tools 

  1. Transmission - Remove - Transmission Replacement .
  2. GM2744964Courtesy of GENERAL MOTORS COMPANY

    To prevent crankshaft rotation, install the EN-50792  holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the automatic flex plate.

  3. GM2726718Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Flex Plate Bolt (1) - Remove and DISCARD [8x]

  4. Automatic Transmission Flex Plate (2) - Remove
  5. Remove the EN-50792  holding tool.
  6. For automatic transmission flex plate cleaning and inspection, refer to Automatic Transmission Flex Plate Cleaning and Inspection .
scientia non olet · About LEMON Manuals