LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Drain and Fill >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Lower the vehicle.
  2. Remove the left front wheel and tire assembly. Tire and Wheel Removal and Installation
  3. GM4487151Courtesy of GENERAL MOTORS COMPANY

    Remove the fluid filler plug (1) from the transmission.

  4. Fill the transmission to the proper level with the correct fluid. Transmission Fluid Level and Condition Check , and Adhesives, Fluids, Lubricants, and Sealers .
  5. GM4487151Courtesy of GENERAL MOTORS COMPANY

    Install the fluid filler plug (1) to the transmission and tighten to 40 N.m (30 lb ft).

  6. Install the left front wheel and tire assembly. Tire and Wheel Removal and Installation