LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Torque Converter Fluid Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Torque Converter - Remove - Torque Converter Replacement 
  2. GM4381740Courtesy of GENERAL MOTORS COMPANY

    Using the DT-6125-B  Slide Hammer and the EN-23129  Universal Seal Remover, removed and DISCARD the torque converter fluid seal (1).

scientia non olet · About LEMON Manuals