Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0815, P0816
- DTC P0815, P0816, P0826, P1761 = Not set
- Engine Speed = 400 to 7,500 RPM
- Ignition Voltage = Greater than 9 V
- Time since the last transmission shift = Greater than 1 s
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0826
- DTC P1761 = Not set
- Engine Speed = 400 to 7,500 RPM
- Ignition Voltage = Greater than 9 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s