Turbocharger Wastegate Regulator Solenoid Valve Replacement

WARNING: This page is about a different variant/trim than selected.

Callout	Component Name
1	Turbocharger Wastegate Regulator Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 7.8 N.m (69 lb in)
2	Vacuum Hose and Clamp [3x]
3	Turbocharger Wastegate Regulator Solenoid Valve Procedure Disconnect the electrical connector. Perform the intake system learned values reset. Intake System Learned Values Reset

Callout

Component Name

Turbocharger Wastegate Regulator Solenoid Valve Fastener

CAUTION:

Tighten
7.8 N.m (69 lb in)

Vacuum Hose and Clamp [3x]

Turbocharger Wastegate Regulator Solenoid Valve

Procedure

Disconnect the electrical connector.
Perform the intake system learned values reset. Intake System Learned Values Reset