Camshaft Position Actuator Exhaust Solenoid Valve Replacement

WARNING: This page is about a different variant/trim than selected.

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Disconnect the electrical connector.
1	Camshaft Position Actuator Exhaust Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Exhaust Solenoid Valve Procedure NOTE: Inspect the OCV O-ring seals. If damaged, replace the OCV assembly.

Callout

Component Name

Preliminary Procedures

Camshaft Position Actuator Exhaust Solenoid Valve Fastener

CAUTION:

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Exhaust Solenoid Valve
Procedure

NOTE:

Inspect the OCV O-ring seals. If damaged, replace the OCV assembly.