Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0D69
- 12 V battery system voltage is greater than 10.2 V.
- Vehicle is in Run Mode or Accessory Mode
- Main HV battery contactors must be closed.
- DTCs P0AA4, P0ABB, P0ABC, P0ABD, P0AD9, P0C78, P0D5E, P0D6A; P0D6B, P1EC3, P2534, P2535, P3061, U0111, U016B, or U185A must not be set.
DTC P0D6A
- 12 V battery system voltage is above 10.2 V.
- Vehicle is in Run Mode or Accessory Mode
- Main HV battery contactors must be closed.
- DTCs P2534, P2535, or U016B must not be set.
DTC P0D6B
- 12 V battery system voltage is above 10.2 V.
- Vehicle is in Run Mode or Accessory Mode
- Main HV battery contactors must be closed.
- DTCs P0AA4, P0AD9, P0C78, P0D5E, P1EC3, P2534, P2535, P3061, or U016B must not be set.
DTC P0D71 or P0D76
- 12 V battery system voltage is above 10.2 V.
- Vehicle is in Run Mode or Accessory Mode
- Compressor has been off for more than 2 hours
- Outside air temperature is greater than -7°C (19°F)
- DTCs P0071, P0072, P0073, P0074, P0D72, P0D73, P0D77, P0D78, P2534, P2535, or U016B must not be set
DTC P0D72, P0D73, P0D77, or P0D78
- 12 V battery system voltage is above 10.2 V.
- Vehicle is in Run Mode or Accessory Mode
- DTCs P2534, P2535, or U016B must not be set