Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:Automatic HVAC Description and Operation
| Circuit | Description |
|---|---|
| Ignition - Relay Coil | Supplied from a relay. |
| B+ - Relay Switch | Supplied from a fuse. |
| Control - Component | The output circuit is switched to 12 V to activate the component. |
| Control - Relay Coil | The output circuit is switched to ground to activate the component. |
| Ground - Component | Chassis Ground |
| Component | Description |
|---|---|
| Q2 A/C Compressor Clutch | The clutch is normally disengaged.When the solenoid actuator is turned on, the clutch engages and couples the belt pulley to the compressor. |
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. |