Component Testing
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition/Vehicle - Off
- Disconnect the electrical connector: Q46 A/C Compressor Solenoid Valve
- Test for 7 to 15 ohms between the test points: Control terminal 1 & Control terminal 2
- If not between 7 and 15 ohms
Replace the component: Q46 A/C Compressor Solenoid Valve
- Go to next step: If between 7 and 15 ohms
- If not between 7 and 15 ohms
- Test for infinite resistance between the test points: Each terminal of the component & The component's housing
- If less than infinite resistance
Replace the component: Q46 A/C Compressor Solenoid Valve
- Go to next step: If infinite resistance
- If less than infinite resistance
- All OK.