Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function:Actuator Recalibration
Verify the DTC does not set.
- If the DTC sets
- Verify DTC B1395 is not set.
- If DTC B1395 is set - Refer to Circuit/System Testing.DTC B1395
- If DTC B1395 is not set - Refer to Circuit/System Testing.DTC B0223, B0228, B0233, B0408, B0413, B0418, B0423, B374A
- Go to next step: If the DTC does not set
- All OK.