LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> DTC B094D or B094E >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Ignition - On / Vehicle - In Service Mode
  3. Verify the component turns On and Off:
    • Side Blind Zone Alert Indicator @ A9A Outside Rearview Mirror - Driver
    • Side Blind Zone Alert Indicator @ A9B Outside Rearview Mirror - Passenger
    • If the component does not turn On and Off

      Refer to Circuit/System Testing.

    • Go to next step: If the component turns On and Off
  4. All OK.