LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Mirror System) >> Diagnostic Information and Procedures >> Power Mirror Malfunction (Without A45) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component:S146 Window/Outside Rearview Mirror Switch - Driver - Select each position
    • {Mirror Select Switch}Verify the scan tool parameter:Mirror Select Switch = None/Left/Right
    • {Mirror Direction Switch}Verify the scan tool parameter:Mirror Direction Switch = InactiveUp/Down/Right/Left
    • If not the specified state 

      Refer to: Circuit/System Testing - Test 1

    • Go to next step: If the specified state 
  3. Verify the function:Driver SidePowerMirror Movement = Inoperative
    • If the component does not work as specified 

      Refer to: Circuit/System Testing - Test 2

    • Go to next step: If the component works as specified 
  4. Verify the function:Passenger SidePowerMirror Movement = Inoperative
    • If the component does not work as specified 

      Refer to: Circuit/System Testing - Test 3

    • Go to next step: If the component works as specified 
  5. All OK.
scientia non olet · About LEMON Manuals