Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Ignition - On / Vehicle - In Service Mode
Operate the component:S146 Window/Outside Rearview Mirror Switch - Driver - Select each position
- {Mirror Select Switch}Verify the scan tool parameter:Mirror Select Switch = None/Left/Right
- {Mirror Direction Switch}Verify the scan tool parameter:Mirror Direction Switch = InactiveUp/Down/Right/Left
- {Mirror Folding}Verify the scan tool parameter:Mirror Folding Control Switch = Unfold/Fold
- If not the specified state
  Refer to:Power Mirror Malfunction (With A45)
- Go to next step: If the specified state
Perform the scan tool control function:Driver Mirror Fold Motor Command - Fold & Unfold
Verify the function:Mirror Folding = Fold & Unfold
- If the component does not work as specified
  Refer to: Circuit/System Testing - Driver Mirror FoldMalfunction
- Go to next step: If the component works as specified
Perform the scan tool control function:Passenger Mirror Fold Motor Command - Fold & Unfold
Verify the function:Mirror Folding = Fold & Unfold
- If the component does not work as specified
  Refer to: Circuit/System Testing - Passenger Mirror FoldMalfunction
- Go to next step: If the component works as specified
All OK.