Air Inlet Grille Panel Replacement
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
|
Preliminary Procedures
- Windshield Wiper Arm Replacement
- Air Inlet Grille Panel Extension Replacement
|
| 1 |
Air Inlet Grille Panel Retainer [8x] Procedure
- Use a flat bladed plastic trim tool.
- Release the plastic retaining tabs.
|
| 2 |
Air Inlet Grille Panel Procedure
- Lift up the front edge of the air inlet grille panel, slide the grille panel forward from both hood hinges.
- Disconnect the windshield washer nozzle hose from the windshield washer nozzle hose connector hose.
- Transfer components as necessary.
|