LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Wiper System And Washer System) >> Diagnostic Information and Procedures >> Washer Malfunction >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Windshield Washer Switch

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition - On / Vehicle - In Service Mode
Parameter Normal Range: 
  • Inactive - Switch - Not Pressed
  • Active - Switch - Pressed
Signal Active Inactive Inactive
Low Reference - Inactive -
Windshield Washer Relay Command

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition - On / Vehicle - In Service Mode
Parameter Normal Range:  Inactive/ Active
  • Inactive - Perform the scan tool control function:Windshield Washer Relay Command - Not Pressed
  • Active - Perform the scan tool control function:Windshield Washer Relay Command - Button Pressed
Signal Active Inactive Inactive
Ground - Inactive -
Signal Active Inactive Inactive
Ground - Inactive -
  1. G24 Windshield Washer Pump = Inoperative
scientia non olet · About LEMON Manuals