Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Hybrid Powertrain Control Module (2) - Install
- Hybrid Powertrain Control Module Mounting Nut (1) - Install and tighten [3X] 9 N.m (80 lb in)
Electrical Connector (1) - Connect [4X]
Electrical Connector (1) - Connect [3X]
High Voltage Battery Cover (2) - Install - High Voltage Battery Cover Replacement
High Voltage Battery Positive and Negative Cable Cover (2) - Install - High Voltage Battery Positive and Negative Cable Cover Replacement
- Enable the high voltage system. High Voltage Enabling
- Reprogram the hybrid powertrain control module 2, refer to Control Module References
CAUTION:
Refer to Fastener Caution