Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Slide the cell battery vent tube grommet (2) onto the battery hold down retainer side panel.
- Engage the battery vent tube onto the retainer clips (1).
- Install the cell battery vent tube onto each cell battery module.
High Voltage Battery Tray Reinforcement - Right Side (1) - Install - High Voltage Battery Tray Reinforcement Replacement (Right Side)
High Voltage Battery Tray Reinforcement - Left Side (1) - Install - High Voltage Battery Tray Reinforcement Replacement (Left Side)
High Voltage Battery (1) - Install - High Voltage Battery Replacement and Shipping Preparation
- Enable the high voltage system. High Voltage Enabling