Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Battery Cable (4) - Install
- Auxiliary Battery Cable Nut (1) - Install and tighten [2X] 9 N.m (80 lb in)
- Electrical Connector (3) - Connect
- Retainer Clip (2) Engage [2X]
High Voltage Battery Tray Reinforcement - Right Side (1) - Install - High Voltage Battery Tray Reinforcement Replacement (Right Side)
High Voltage Battery Tray Reinforcement - Left Side (1) - Install - High Voltage Battery Tray Reinforcement Replacement (Left Side)
High Voltage Battery (1) - Install - High Voltage Battery Replacement and Shipping Preparation
- Enable the high voltage system. High Voltage Enabling
CAUTION:
Refer to Fastener Caution