LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0AC1 or P0AC2 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicle in Service Mode, all accessories OFF.
    2. NOTE:

    Typical current in a parked vehicle with the Vehicle in Service Mode and all accessories OFF is between 1 A and 10 A.

  2. Verify the scan tool hybrid/EV powertrain control module 2 Hybrid/EV Battery Pack Current parameter is between -365.1 A and +274.6 A and changes with the amount of current draw on the hybrid/EV battery pack.
    • If not within the specified range 

      Refer to Circuit/System Testing.

    • Go to next step: If within the specified range 
  3. All OK.
scientia non olet · About LEMON Manuals