LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0AA1, P0AA4, P0AD9, P0ADB-P0ADD, P0ADF, P0AE0, P0AE4, P0AE6, P0AE7, or P1EC0 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

P0AA1 

The positive bus voltage is greater than 30 V.

P0AA4 

The negative bus voltage is greater than 30 V.

P0AD9, P0ADD and P0AE4 

The hybrid/EV powertrain control module 2 has detected an open in the control circuit for the corresponding contactor.

P0ADB, P0ADF, and P0AE6 

The hybrid/EV powertrain control module 2 has detected a short to ground in the control circuit for the corresponding contactor.

P0ADC, P0AE0, and P0AE7 

The hybrid/EV powertrain control module 2 has detected a short to voltage in the control circuit.

P1EC0 

The main bus voltage is less than 80% of hybrid/EV battery voltage.