LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0A0C or P0A0D >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify all monitored high voltage components and connectors are connected.
  2. Vehicle in Service Mode.
  3. Observe the hybrid/EV powertrain control module 2 High Voltage Interlock Circuit Status parameter. Verify the parameter indicates a PASS condition.
    • The parameter indicates a FAIL condition 

      Refer to Circuit/System Testing.

    • Go to next step: The parameter indicates a PASS condition 
  4. All OK.
scientia non olet · About LEMON Manuals