Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Ensure the fork of the brake pedal position sensor is positioned over the post on the brake pedal arm.
Brake Pedal Position Sensor (1) - Install
- CAUTION:NOTE:
Install a NEW bolt.
Brake Pedal Position Sensor Bolt (1) - Install and tighten 3 N.m (27 lb in)
- Connect the brake pedal position sensor electrical connector.
- Calibrate the brake pedal position sensor. Brake Pedal Position Sensor Calibration