Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Install the rear transmission mount (3).
- Install the NEW rear transmission mount to frame bolt (2) and nut then tighten to 100 N.m (74 lb ft) plus 120 - 135 degrees.
- Install the rear transmission mount bracket to rear mount through bolt (1) and tighten to 70 N.m (52 lb ft) plus 90 - 105 degrees
- Install the front exhaust pipe. Exhaust Front Pipe Replacement (LKN) .
CAUTION:
Refer to Torque-to-Yield Fastener Caution .
CAUTION:
Refer to Fastener Caution .