Transmission Mount Strut Bracket Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Exhaust Front Pipe Replacement (LKN) Using a suitable jack stand, support the rear of the powertrain.
1	Transmission Mount Strut Bracket Bolt [3x] CAUTION: Torque-to-Yield Fastener Caution Procedure Always use NEW bolts. - Do NOT reuse old bolts. Tighten First Pass:100 N.m (74 lb ft) Final Pass:60 - 75 degrees Special Tools EN-45059 Angle Meter Equivalent regional tools:Special Tools
2	Transmission Mount Strut Bolt CAUTION: Fastener Caution Tighten First Pass:70 N.m (52 lb ft) Final Pass:90 - 105 degrees
3	Transmission Mount Strut Bracket