LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine Wiring Harness Junction Block - Remove - Engine Wiring Harness Junction Block Replacement (LKN)
  2. Engine Wiring Harness Fuse Block Bracket - Remove - Engine Wiring Harness Fuse Block Bracket Replacement
  3. Electronic Brake Control Module with Brake Pressure Modulator Valve - Remove - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
  4. Using a suitable jack, support the transmission.
  5. Prior to removing the mount, mark the mount location using paint pen or a marker for correct positioning during installation.
  6. GM4283617Courtesy of GENERAL MOTORS COMPANY

    Transmission bracket bolt (1) - Remove [2x]

  7. Remove the transmission bracket (2).
  8. Remove the three wiring harness retainers and reposition the main wiring harness from the left frame rail.
  9. Transmission Mount Bolt (3) Remove [2x]
  10. Transmission Mount Bolt (4) Remove and DISCARD [3x]
  11. Transmission Mount (5) - Remove
scientia non olet · About LEMON Manuals