Front Wheel Drive Shaft Seal Replacement - Left Side

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Wheel Drive Half Shaft Replacement - Left Side (MKE)
1	Front Wheel Drive Shaft Seal Procedure Push the steering knuckle aside. NOTE: For pushing the steering knuckle aside a 2nd technician is required. For seal removal use GE-6125-1B Slide Hammer with Adapter with GE-23129 Universal Seal Remover. For seal installation use GE-8092 Driver Handle with DT-50301 Seal Installer. Special Tools DT-50301 Seal Installer GE-6125-1B Slide Hammer with Adapter GE-8092 Driver Handle GE-23129 Universal Seal Remover Equivalent regional tools:Special Tools

Callout

Component Name

Preliminary Procedure
Front Wheel Drive Half Shaft Replacement - Left Side (MKE)

Front Wheel Drive Shaft Seal
Procedure
Push the steering knuckle aside.

NOTE:

For pushing the steering knuckle aside a 2nd technician is required.
For seal removal use GE-6125-1B Slide Hammer with Adapter with GE-23129 Universal Seal Remover.
For seal installation use GE-8092 Driver Handle with DT-50301 Seal Installer.

Special Tools

DT-50301 Seal Installer
GE-6125-1B Slide Hammer with Adapter
GE-8092 Driver Handle
GE-23129 Universal Seal Remover

Equivalent regional tools:Special Tools