LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - On Vehicle >> Automatic Transmission Wiring Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4037419Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Install the manual shift detent lever spring previously removed to aid the removal of the transmission wiring harness.

    Install the automatic transmission wiring harness's (2, 4) to the transmission. Control Valve Assembly and Transmission Wiring Harness Installation 

  2. Connect the wiring harness connectors to the valve body's.
  3. Install the control valve body cover. Control Valve Body Cover Replacement 
  4. Install the drive motor power inverter cover. Drive Motor Power Inverter Module Cover Replacement 
scientia non olet · About LEMON Manuals