LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - Off Vehicle >> Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal >> Automatic Transmission Wiring Harness Bracket Removal

Automatic Transmission Wiring Harness Bracket Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4037342Courtesy of GENERAL MOTORS COMPANY
Automatic Transmission Wiring Harness Bracket Removal

Callout Component Name
Preliminary Procedure 
Remove the drive motor wiring harness connectors from the wiring harness connector brackets.
1 Automatic Transmission Wiring Harness Connector Bracket Bolt [1x]
2 Automatic Transmission Wiring Harness Bracket
3 Automatic Transmission Wiring Harness Connector Bracket Bolt [1x]
4 Automatic Transmission Wiring Harness Bracket
scientia non olet · About LEMON Manuals