Holding Fixture Installation

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Transmission Case WARNING: Handle with care, the transmission assembly weighs over 183 Kg (403 lbs). Bodily injury could occur if not handled properly. CAUTION: Refer to Fastener Caution . Procedure Use the supplied template to relocate holes on the fixture for mounting blocks. Adjust mounting blocks on DT-46625 Holding Fixture to match bosses on case and tighten to 13 N.m (115 lb in). Special Tools DT-03289-20 Holding Fixture Base Assembly DT-46625 Holding Fixture DT-46625-20 Holding Fixture Adapters For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Transmission Case

WARNING:

Handle with care, the transmission assembly weighs over 183 Kg (403 lbs). Bodily injury could occur if not handled properly.

CAUTION:

Refer to Fastener Caution .

Procedure

Use the supplied template to relocate holes on the fixture for mounting blocks.
Adjust mounting blocks on DT-46625 Holding Fixture to match bosses on case and tighten to 13 N.m (115 lb in).

Special Tools

DT-03289-20 Holding Fixture Base Assembly
DT-46625 Holding Fixture
DT-46625-20 Holding Fixture Adapters

For equivalent regional tools, refer to Special Tools .