LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - Off Vehicle >> Drive Motor Installation - 2nd Position >> Drive Motor - 2nd Position Bolt Installation

Drive Motor - 2nd Position Bolt Installation

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4038819Courtesy of GENERAL MOTORS COMPANY
Drive Motor - 2nd Position Bolt Installation

Callout Component Name
1 Automatic Transmission Case Extension Bolt [1x]
NOTE:

Use NEW bolts.


Tighten 
38 N.m (28 lb ft)
2 Automatic Transmission Case Extension Bolt [1x]
NOTE:

Use NEW bolts.


Tighten 
38 N.m (28 lb ft)
3 Automatic Transmission Case Extension Bolt [2x]
Tighten 
38 N.m (28 lb ft)
4 Drive Motor Power Inverter Module 3-Phase Cable Bolt [3x]
Tighten 
9 N.m (80 lb in)