LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - Off Vehicle >> Control Valve Assembly and Transmission Wiring Harness Removal >> Control Solenoid Valve Removal

Control Solenoid Valve Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4037251Courtesy of GENERAL MOTORS COMPANY
Control Solenoid Valve Removal

Callout Component Name

Preliminary Procedure

  1. Disconnect the control solenoid valve wiring harness.
  2. Remove the connectors from the wiring harness brackets and shift detent lever.
1 Control Valve Body Bolt [4x]
2 Control Solenoid Valve
3 Control Solenoid Valve Filter Plate
NOTE:

The filter plate is reusable, inspect the filter plate and replace if damaged.
scientia non olet · About LEMON Manuals