LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - Off Vehicle >> Automatic Transmission Torque Dampener and Differential Housing Disassemble >> Input Drive Flange Removal

Input Drive Flange Removal

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM4051462Courtesy of GENERAL MOTORS COMPANY
Input Drive Flange Removal

Callout Component Name
1 Automatic Transmission Torque Dampener Bolt [6x]
Procedure 
Use DT-51654  holder in a vise to hold the torque dampener while removing the bolts.
NOTE:

DISCARD the bolts.


Special Tools 
DT-51654  Dampener Holder
For equivalent regional tools, refer to Special Tools .
2 Input Drive Flange
scientia non olet · About LEMON Manuals