LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> Harsh, Soft, Delayed or Slipping Drive or Reverse Gear

Harsh, Soft, Delayed or Slipping Drive or Reverse Gear

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
Variable Low Clutch Assembly
  • Inspect for damaged or worn variable low clutch plates.
  • Inspect for damaged variable low clutch backing plate.
  • Inspect for damaged variable low clutch backing plate retaining ring.
  • Inspect for damaged variable low clutch piston assembly and spring.
Variable High Clutch Assembly
  • Inspect for damaged or worn variable high clutch plates.
  • Inspect for damaged variable high clutch backing plate.
  • Inspect for damaged variable high clutch backing plate retaining ring.
  • Inspect for damaged variable high clutch piston assembly and spring.
Control Valve Assembly
  • Inspect solenoid module assembly for damage to plastic body, electrical connections and wire harness, or seal plate.
  • Inspect low variable shift valve for stickiness or stuck condition.
  • Inspect for stuck or sticky compensator feed valve.
  • Inspect for leak paths within the variable high or compensator feed hydraulic circuits.
  • Inspect for leaking or damaged control valve body spacer plate.
  • Inspect for plugged control valve body spacer plate orifice (s).