Circuit/System Testing
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Verify DTC C0035-C0050, C0500-C0504, C0506-C0510, C0512-C0516, C1207-C1210, C1221-C1228, C1232-C1235, C005A, C0245, C122E, P0721, P0723, U0073, U0074, U0077, U0101, U0129, or U1833 is not set.
- If any of the DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If the DTCs are not set
- If any of the DTCs are set
- Verify the control module which set the DTC has the latest calibration in Calibration Information.
- If the control module does not have the latest calibration, program the control module.
- If the control module has the latest calibration, replace the control module.
- Retest for DTCs.
- If the DTC resets
Replace the control module which set the DTC.
- Go to next step: If the DTC does not reset
- If the DTC resets
- All OK.