LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> DTC P1761 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify there are no other Hybrid/EV Powertrain Control Module 1 or communication DTCs set.
    • Go to next step: If a DTC is not set 
  2. Complete the diagnosis by looking for a CAN fault. Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device .
    • If a CAN circuit fault is found 

      Repair as necessary.

    • Go to next step: If a CAN circuit fault is not found 
  3. Replace the T6 Power Inverter Module.