LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> DTC P0960, P0962, or P0963 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicle ON, verify the transmission fluid temperature is between 50 - 80°C (122 - 176°F).
  2. Drive the vehicle, observe the scan tool Line Pressure Control Solenoid Valve Test Status parameters. The reading should display OK.
    • If the reading is not within the specified value 

      Refer to Circuit/System Testing.

    • Go to next step: If the reading is within specification 
  3. All OK.
scientia non olet · About LEMON Manuals