LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> DTC P07A3 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Variable Low Clutch Reference

Parameter Commanded ON Commanded OFF Stuck/Welded When Commanded OFF
Operating Conditions:  Vehicle speed 0 - 50 MPH (80 km/h)
Parameter Normal Range:  0 - 6, 000 RPM
Clutch 1 Slip Speed 0 RPM 0 - 9, 500 RPM 0 RPM
Clutch 1 Status Applied Released Released