LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> DTC P07A3 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that P0721, P077B-P077D or P215C is not set.
  2. Perform the Transmission Fluid Level and Condition Check  to verify correct fluid level and condition.
  3. Operate the vehicle within the Conditions for Running the DTC while monitoring the Clutch 1 Slip Speed parameter. The Clutch 1 Slip Speed parameter should display greater than 30 RPM when the Clutch 1 Status parameter displays Released.
    • If the DTC P07A3 resets, go to Component Testing.