LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Floor Coverings And HEADLININGS) >> Repair Instructions >> Headliner Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Take note of the wiring harness locations and measure the harness lead length prior to removing. Mark harness routing locations on new headliner prior to harness removal.
    2. NOTE:

    Use a camera to take pictures and use a pencil to mark the new headliner.

  2. Use fiber or plastic trim tool to assist in removing the wiring harness from the headliner, taking care not to damage the harness.
  3. Remove excess glue and material from the wiring harness and re-tape areas where the tape was removed or damaged.
scientia non olet · About LEMON Manuals