Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Airbag Front End Discriminating Sensor Assembly Fastener | 7.5 N.m (66 lb in) |
| Airbag Front Seat Position Sensor Fastener | 7.5 N.m (66 lb in) |
| Airbag Sensing and Diagnostic Module Nut | 9 N.m (80 lb in) |
| Airbag Side Impact Rear Sensor Assembly Fastener | 7.5 N.m (66 lb in) |
| Airbag Side Impact Sensor Assembly Fastener | 7.5 N.m (66 lb in) |
| Front and Rear Row Seat Roof Rail Airbag Fastener | 9 N.m (80 lb in) |
| Front Seat Belt Anchor Bolt | 5 N.m (44 lb in) |
| Front Seat Belt Anchor Plate Tensioner Bolt | 45 N.m (33 lb ft) |
| Front Seat Belt Intermediate Guide Bolt | 9 N.m (80 lb in) |
| Front Seat Belt Retractor Bolt - Lower | 45 N.m (33 lb ft) |
| Front Seat Belt Retractor Bolt - Upper | 9 N.m (80 lb in) |
| Front Seat Belt Retractor D Ring Bolt | 45 N.m (33 lb ft) |
| Front Seat Outboard Seat Back Airbag Nut | 3.5 N.m (31 lb in) |
| Instrument Panel Lower Airbag Nut | 9 N.m (80 lb in) |
| Rear Seat Bolster Airbag Nut | 3.25 N.m (29 lb in) |